Concrete Mixer Truck With Pump Price

 
The concrete mixer truck with pump price is lower than the price of concrete mixer truck plus concrete pump machine. The concrete mixer truck with pump machine is a kind of mechanical equipment used by many construction parties, which can greatly improve the efficiency of construction. If you want to extend the service life of the concrete mixer with pump machine, a certain amount of maintenance is required when the concrete mixer pump machine is in use, so what must be maintained when concrete mixer with pump machine is used? This is a problem that many construction parties are very concerned about.

 
In order to ensure that the concrete mixer with pump machine can go on smoothly when it is working, it needs to be regularly maintained. Usually maintenance is divided into daily maintenance, monthly maintenance and annual maintenance. If the maintenance is in place, the construction work will be smoother, and the service life of the concrete mixer truck with pump machine can also be extended. So what must be maintained when the concrete mixing pump machine is used? Now we introduce as follows:
1, Daily basic maintenance:
After pumping for about 5 minutes before starting work every day, check the lubrication of the four lubrication points in the hopper and the washing room to see if the lubrication is normal. After the completion of each day, the water in the washing room should be drained. Clean the washing room and exit the piston to check the piston, and then tighten the rubber plug to add new water. After the completion of each day, the cement left in the hopper and on the truck should be cleaned in time. (In the hopper No cement can be left in the dead corner). Avoid unnecessary trouble for future cleaning work.
2, Monthly basic maintenance:
The whole concrete mixer truck with pump needs to be buttered once a month, and the amount of butter must be waited until the clean oil has squeezed out the dirty oil before stopping the filling. Check the condition of the structural parts every month. See if there is cracking or other phenomena. It is necessary to check every month whether the cutting ring and the glasses plate are worn or the gap is too large. If there is wear, please turn the cutting ring 90° in time, so that the service life of the cutting ring will be doubled. It is also necessary to check the observation hole of the stirring motor seat every month to check for slurry leakage.
3, Annual basic maintenance:
Hydraulic oil, transfer case, and reducer oil need to be replaced every year. The entire concrete mixer truck with pump price performance needs to be inspected and tested once a year. In addition, the maintenance of the chassis is also very important, please maintain the chassis in time.